Full Kit PRO Test per Substance Purity

Domande?

• What is Full Kit PRO Test per Substance Purezza for?

  Full Kit PRO Test per Substance Purezza is used to discover number e amount (%) of ingredients in a campione, including ruling out caffeine, PMA/PMMA e other, less predictable, less desirable, highly toxic dangerous drugs. It can detect adulteranti e potenza of CBD, THC, anfetamina, cocaina, CMC, mefedrone (MMC), MDMA, ketamina as well as approximately check other compounds too. It does not identify detected substances without pairing with a kit di test al reagente for identificazione.

• Cosa contiene il Full Kit PRO Test per Substance Purezza?

  Full Kit PRO Test per Substance Purezza include instructions, gloves, 6 vials, 5 testing “cards”, jar, pipette, testing liquids (40 ml), 20 glass tubes, UV-C flashlight (4 AA batteries required, not included) e % ruler. Each 1 “card”, 4 glass tubes e 2 ml of testing liquid equal 4 tests. Testing “card” can be reused untill fully used. Glass e metal protect testing liquid from air e moisture to ensure prolonged shelf life. High-quality caps e lid guarantee 0 spills. 

  Full TLC substance kit di test di purezza include:

  • 1 Cocaina Testing Liquid
  • 1 Cannabinoide Testing Liquid
  • 1 Primary Testing Liquid

   

  Additional multi-kit di test al reagente is required to identify ingredients e increase analysis precision. TLC test di purezza kits can detect NUMBER e AMOUNT of substances, but not their TYPE. Pair TLC kit di test with kit di test al reagente to indentify ingredients. Reagenti alone detect mixtures only if adulterante causes a darker cambiamento di colore than the expected substance.
  

• Come si usa Full Kit PRO Test per Substance Purezza?

  PREPARA GLI STRUMENTI

  First, prepare a clean e well lit testing surfach. Get your campione, spatula, gloves, plastic vial, testing liquid, pipette, pencil, glass tube, wrapped esting cards, jar e UV-C flashlight. Next, carefully holding a testing “card” by only top edges mark 4 dots 1 cm apart from card’s bottom, sides e each other.

  PREPARE SAMPLE

  If testing a pill, powder or crystal, crush it finely. Weigh campione in a plastic vial e dissolve in testing liquid (or other solvent) using ratios mentioned in the booklet. Shake to dissolve. To big or too small campione can cause an inconclusive result.

  ADD SAMPLE TO CARD 

  In case of sediment wait a minute for it to fall down. Under strong light submerge end of glass tube to fill it with dissolved campione. Gently touch one of the marked dots on Testing Card to discharge campione e mark the spot with pencil.

  INSERT CARD INTO JAR

  Add 2 ml of testing liquid inside jar e carefully, paying attention to not touch the white side of Testing Card with campione, insert it inside jar. Close the jar e observe for about 25 minutes, until Testing Card almost fully soaks – but not any longer. Remove Testing Card from jar, wait for it to dry.

  COMPARE RESULTS

  Use UV-C flashlight to reveal results. Spots on Testing Card revealed by UV-C light circle using pencil. Each spot indicates a separate substance.  TLC test di purezza kits can detect NUMBER e AMOUNT of substances, but not their TYPE. Pair TLC kit di test with kit di test al reagente to indentify ingredients. Reagenti alone detect mixtures only if adulterante causes a darker cambiamento di colore than the expected substance.

  To reuse Testing Card do not apply reagente tests on it.

• How to interpret TLC kit di test results?

   CLICK BELOW TO VIEW FULL RESOLUTION

  

• What % range can be determined?

  The TLC kit di test can determine from as low as 0.2% up to 100%. Instructions explain how to use ratios to analyze trace, avarage e high potenza samples, even beyond the scale printed on a % ruler.

  Note: read carefully product description to make sure if the kit is suitable for precise % amount estimation of the substance you are interested in. If not, then aside from detecting cuts the kit will only approximately help you compare amounts of the same substance in different samples.

• How to handle TLC test kits?

  Testing liquids contain toxic e/or corrosive chemicals, strong enough to burn skin e clothing. Tieni lontano da occhi e bocca. Tieni lontano da bambini e animali. Usa sempre in un’area ben ventilata. Indossa i guanti (forniti) quando maneggi il flacone e il tappo. Wear protective eyewear. Non puntare mai verso il viso, ecc. Se ne finisce su di te o sui vestiti, lava subito con abbondante acqua e sapone. Smaltisci ogni reagente non utilizzato con acqua corrente, arieggiando. Store away from heat in a cool, dark place. TLC tests do not expire if stored correctly.

• What TLC testing liquids are available?

  Check what testing liquid è ideale per testing which substances:

  • Cannabinoide Testing Liquid – for all cannabinoide products (especially CBD e/or THC)
  • Cocaina Testing Liquid – for cocaina
  • Primary Testing Liquid – for other alkaloids e synthetic compounds

   

  We recommend to get spare testing liquid to save on shipping.
  Note: you can use any solvent to dissolve your campione, e.g. ethanol.

• How to test for fentanyl?

  Use fentanyl strisce reattive (a fentanyl kit di test)

  

  METHOD 1   

  If testing a benzo/oppioide pill, crush one in a plastic baggie e dump out the powder.  Aggiungi poi 10 gocce d’acqua nella bustina e mescola bene. Immergi la striscia reattiva non oltre la linea spessa. Attendi 15 secondi. Metti via la striscia e controlla dopo 5 minuti.

  METHOD 2

  Mix 100 mg of campione in 200 ml of water. Immergi la striscia reattiva non oltre la linea spessa. Attendi 15 secondi. Metti via la striscia e controlla dopo 5 minuti.

  COMPARE RESULTS

  1 line = fentanyl, 2 lines = no fentanyl. Anche le linee deboli contano. Ignora i risultati del test del fentanyl dopo 5 minuti.

  To detect all ingredients e estimate their amount pair reagenti with a TLC kit di test di purezza.

• What is each colorimetric test al reagente for?

  Full Kit PRO Test per Substance Purezza is best paired with  Full Kit PRO Test per Substance Identificazione, recommended for 800+ substances.

  To compare reagenti, check the table below:

  

  • Cannabis (4-AP) – main test for THC / CBD, helps rule out synthetic cannabinoidi
  • Ehrlich – main test for all indoles, e.g. lysergamides e tryptamines but also 5-HTP e altro, secondary test for cocaina
  • Hofmann – main test for lysergamides e tryptamines, more precise but slower than Ehrlich
  • Froehde – main test for most powders, secondary test for ketamina e amphetamines, long shelf life
  • Liebermann – main test for most powders, secondary test for cocaina (detects levamisole)
  • Marquis – main test for most powders, secondary test for ketamina, mefedrone e psychedelics
  • Mecke – main test for most powders, secondary test for cocaina, ketamina e mefedrone
  • Morris – main test for cathinones, cocaina e ketamina, can tell apart some novel dissociativi
  • Robadope – main test for primary amines, e.g. MDA, anfetamina or PMA
  • Simon – main test for secondary amines, e.g. MDMA, meth, mefedrone, methylone or PMMA
  • Zimmermann / Beam – main test for cathinones e benzodiazepines in geneal, detects also CBD

  Fentanyl Test Strip to detect fentanyl, even if it is mixed in another substance.

  Reagenti can indicate PRESENCE, but not QUANTITY (unless specifically described otherwise). Gli adulteranti possono essere rilevati con i reagenti solo se provocano un cambiamento di colore più scuro della sostanza attesa. To detect all ingredients e estimate amounts pair reagenti with a TLC kit di test di purezza.

• What are the differences between types of test kits?

  

• Altre domande?

  Click here to see our main FAQ on the home page.